Shen zhen Yi Jin Sheng technology Co.,Ltd
Shen zhen Yi Jin Sheng technology Co.,Ltd Qualtiy is our Credit,With YJS together to build a brighter future
Add to Cart
| Model item |
S1K (R) |
S1K (R)S |
S2K (R) |
S2K (R)S |
S3K (R) |
S3K (R)S |
S6K
|
S6K (R)S |
S10K
|
S10K (R)S |
||
| Rated power | 1000VA/800W | 2000VA/1600W | 3000VA/2400W | 6kVA/5.4kW | 10kVA/9kW | |||||||
| AC Input | Input system | Single phase (L/N+PE) | ||||||||||
| Nominal voltage |
HV: 208/220/230/240Vac LV:100/110/120/127Vac |
|||||||||||
| Frequency | 50/60Hz | |||||||||||
| Voltage range |
HV: 90~300VAC±5VAC LV: 60-145Vac±3VAC |
|||||||||||
| Frequency range | (40~70)±0.5Hz | |||||||||||
| Input power factor | >0.99 | |||||||||||
| Bypass Voltage Range |
HV: 115~285VAC×(1±3%) LV: 80~140VAC×(1±3%) |
|||||||||||
|
Battery Input |
Nominal Voltage | 24V | 36V | 48V | 72V | 72V | 96V | 144V | 192V | 192V/240V | ||
| Battery Capacity & Quantity |
12V/7AH x 2pcs |
External |
12V/7AH x 4pcs |
External |
12V/7AH x 6pcs |
External | 12V/7AH x 12pcs | External |
12V/7AH x16/20pcs |
External | ||
| Backup Time |
Half loaded≥8minutes, Full loaded ≥3minutes(standard) |
Half loaded≥6minutes, Full loaded ≥2minutes(standard) |
||||||||||
| Battery charger time | Charger to 90% battery capacity in 5 hours(standard) Dependent on the capacity of external batteries (long backup time) | |||||||||||
|
AC Output |
Output system | Single phase (L/N+PE) | ||||||||||
|
Inverter Mode Output voltage |
HV:208/220/230/240Vac±2% LV:100/110/120/127Vac±2% |
|||||||||||
| Waveform |
Sine Wave THD<3% (linear load) THD<7% (nonlinear load) |
Sine Wave THD<2% (linear load) THD<5% (nonlinear load) |
||||||||||
| Output frequency |
50/60±4Hz (Sync mode) 50/60Hz±1% (Fix Freq. mode) |
|||||||||||
| Dynamic voltage transient range | <9% | <6% | ||||||||||
| Dynamic Transient Recovery | < 100ms | < 60ms | ||||||||||
| Overload capability | 105～125%≥ 60s,126～150%≥30s The recover point is 70% | |||||||||||
| Crest Ratio | 3:1 | |||||||||||
| Transfer time | Battery <-> Line Mode :0ms | |||||||||||
| Communications | RS232 RS485(optional), Dry contact(optional) | |||||||||||
| Alarm Function | AC/DC input under abnormal, overload condition and Inverter problems | |||||||||||
| Protection Function | AC input or output above or below the range of voltage, overload, over temperature and short circuit protection | |||||||||||
| Noise | <50dB | <55dB | ||||||||||